Leaf remover
The new leaf remover is perfect for all vineyards, the work is done properly and uniformly, as if by hand. The simple design ensures quick and easy handling in addition to require little maintenance. The canopy is tracked by a sensor, which automatically manages the tool pressure on the trellising in real time—with no damage to the berries.
Cost-effective
- Only one person required.
- Up to 2.5 MPH for optimal work.
- Available in 1/2 row or full row version on a multifunction carrier.
- Suits all vineyards.
- Reduced maintenance cost.
- Low fuel consumption, with reduced power requirements.
- High forward speed.
Comfort
- Good visibility of the row.
- Machine works quietly.
- Compact, easy to handle in headlands.
- Cantilever and reduced weight.
- Simplicity and reliability.
- Impact-proof design.
Quality
- Row tracking makes it possible to work in all types of vineyards with the same stripping rate, without damaging the fruiting zone and at any of the plant growing stages.
- Automatic safety swing-back mechanism in case frontal shock.
- Automatic tracking of the plant canopy.
- The rollers catch the leaves without damaging the berries.
Ergonomic
- Intuitive driving and commands.
- Simple coupling, hydraulic and electrical connections at shoulder height (1/2 row) reversible.
The PELLENC leaf remover is very simple to set up and function, and it took no time to learn to use it. Automatic tracking of the plant canopy increases the quality of removing without risk of damage to the berries. The swivel head ensures rapid passage in the headlands and also allows me to adjust the working height to each of my vineyard block. The folding position for transport is truly intelligent, and the visibility and comfort are indisputable. Even better, there is hardly any maintenance thanks to its simple design.
ETA ROMAIN PASCAL – Saint-Emilion, France
Simple, easy grip careful work as if done by hand
Automatic tracking of the plant canopy
The sensor coming into contact with the vegetation automatically controls the position of the removing head to perfectly follow the plant canopy. Independent tracking of the right/left modules of the 1 complete row leaf remover.
Modular
The ½ reversible row leaf remover can work to the left or right of the machine and allows quick rotation at the end of the row.
Adaptable on the Optimum carrier
The full row leaf remover can also be coupled with the OPTIMUM carrier.
Removing quality like that done by hand
The row tracking sensor of the SOFT TOUCH leaf remover guarantees complete respect for the grape with its large area of action and a constant leaf removing rate thanks to its high responsiveness. The driver focuses on driving only, Soft Touch does the rest.
No maintenance during the day
The suction roller is placed next to a feed roller. They rotate in opposite directions, grabbing the leaves. The leaves remain whole since they do not pass through the turbine.
A roller brush at the rear cleans the 2 rollers to limit plant and debris deposits, ejects the leaves on the ground without projecting them toward the grapes.
Models
 Standard equipment.
|  | |
| Reversible half row | 1 row | |
|---|---|---|
| Minimum row width – tf | 4.9 | 4.3 ft on the multifunction carrier |
| Number of rows | 1/2 | 1 |
| Hydraulic output required – min. | 7.7 gal | 9.9 gal |
| Coupling system | Front coupling head on tractor | Multifunction carrier |
| Offset settings | | |
| Removing height – in | 14.96 or 18.9 | 14.96 or 18.9 |
| Electric controls on all functions | | |
| Row tracking by sensor | | |
| Safety: Hydraulic cut-off | | |
| Delivered on a pallet stand | | |
Optional equipment
