Eole 2000 and 3000 Sprayers
Accurate, effortless spraying
100% INTEGRATED INTERFACE
EASY TOUCH touchscreen console
A specific control interface is automatically displayed when the sprayer is coupled.
Intuitive menus and pictograms make EOLE settings easy to configure.
Monitoring the work
Instant display of active sections, ground tracking, and tank levels on the EASY TOUCH console.
‘EASY DRIVE’ joystick
Automatic button assignment.
Control of ramp movements and active sections.
The operator can control the tips directly from the joystick by managing the number of active sections, without interrupting the work in progress.
When the right or left spraying boom is fully deactivated, the boom automatically folds up.
Ramp folding in headland turn
When exiting a row, 1 click on the joystick cuts off the spraying, stops the ground tracking, and starts the ramp folding sequence.
When entering a new row, a second click re-extends the ramp and restarts the spraying.
Passing over the vines
Depending on how much room there is at the headland, the whole ramp can be raised to pass over the vines.
Control and check the EOLE setup entirely from the ground.
This panel groups together valves and switches for all sprayer functions.
An intuitive operation guide helps the operator easily position the valves to the desired position.
Enables the operator to prepare the spray mixture safely from the ground.
The mixing can be done while filling the tank.
Large volume and graduated tank (40 litres).
Built-in rinse tank.
THESE BASIC PRINCIPLES ENSURE THAT THE PRODUCT IS SPRAYED EXACTLY WHERE IT SHOULD BE:
Optimal spraying distance
The distance between the diffusers and the canopy can be adjusted to maintain optimal spray quality however thick the foliage.
The pendulum-mounted downpipes keep that distance the same regardless of the tilt.
Adapted to the height of the plant growth
The number of active diffusers can be adjusted according to the height of the plant growth.
The diffusers can be adjusted to ensure that the spray goes exactly where it should.
Each type of anti-drift nozzle has been approved for reducing unsprayed buffer zones.
The EOLE spraying ramp is equipped with ultrasound sensors that allow it to precisely monitor variations in height and tilt: The downpipes remain facing the vines.
Tilt correction up to 30%.
Linked to the suspended ramp and downpipes, the ground tracking keeps working smoothly as you progress.
The working height can be memorised with one click on the EASY TOUCH console.
Three fans located as close as possible to the downpipes
Minimises pressure losses.
Improves the air flow consistency and thereby the spray quality.
DPAE system (electronically controlled flow rate proportional to ground speed)
Regulates the flow rate based on the ground speed to maintain a constant spraying rate.
Intuitive interface fully integrated on the EASY TOUCH console.
With automatic one-click calibration, this system is one of the easiest to use on the market.
GPS tracking of the sprayed rows*
Makes life easier for the operator, as there is no need to count the rows.
Easier to operate: Avoids spraying the same rows twice or forgetting any of them.
A file summarising the work done (customer name, date, surface sprayed, etc.) can be retrieved on a USB flash drive.
MODULAR ACCORDING TO YOUR NEEDS
Easier to use
Automatic hydraulic width adjustment, easily configured and operated on the EASY TOUCH console
Adjustable working width and headland stops.
Available ramp configurations
3 rows of wide vines
4 rows of wide vines
4 rows of narrow vines
2000 litres on the OPTIMUM M
2000 or 3000 litres on the OPTIMUM L and XL
VARIABLE FLOW PUMP FOR THE PRODUCT TO BE SPRAYED
Spraying, mixing the liquid to be sprayed, filling the tanks from below, and rinsing are all carried out efficiently by the same pump.
Maximum flow rate of 260 litres per minute!
Filling the tank and mixing the spray products at the same time is fast and practical.
Variable running speed
The pump rotation speed is always adapted to the job at hand: Fuel savings.
Suitable for spraying from 50 to more than 1000 litres per hectare!
EFFECTIVE MIXING OF THE SPRAY LIQUID
In all conditions
The mixing of the spray liquid in the tanks is independent of the spraying. Effective mixing regardless of the selected spray pressure.
The spray mixture remains consistent throughout the spraying process.
The mixing is automatically stopped at the end of the tank to limit the possible appearance of foam.
Multiple filtration levels
Filtration at intake, discharge, and at each downpipe.
Reduced risk of clogging.
Quick maintenance: All the filters are accessible and located at a level that is easy to reach.
Across the range, 350 litres of on-board water for more efficient rinsing.
The operator can quickly and easily select the rinsing mode from the operating station: tanks, ramp, or mixer independently.
If the spraying work has to be interrupted, rinsing the ramp without flushing to the tank prevents the risk of clogging when restarting.
SAFE TO USE
Pressurised and filtered cab
The cab pressurisation is synchronised with the start-up of the sprayer fans: No risk of forgetting.
An alarm is triggered if any problem is detected (e.g. a door not properly closed)
Hour counter for the active carbon filter on the EASY TOUCH console, with a “time to replace” alert.
1 emergency stop accessible from the ground, on the control console.
Quartier Notre Dame, Route de Cavaillon CS 10047 84120 Pertuis - France
Tel. 33 (0)490 0 94 700 - Fax 33 (0)490 096 409
firstname.lastname@example.org New Generation Optimum Soft Touch 2 leaf remover