SMART PRESS
SPC 240 - 600

The high-quality, smart, large-capacity wine press

The Smart Press range of pneumatic presses meets the expectations of the most demanding winemakers. The Fast Press press grids and intuitive Touch Press control interface make it easy to get the best out of your juices.

High quality juices

  • The juices are protected
  • The juice run-off goes directly into the closed and inert juice tank
  • The aromas and colours are preserved
  • Easy Press 2 smart pressing cycles
  • The juice is clear, not cloudy, thanks to self-filtration through the pomace
  • The Ingas and Enoxy+ system protects against oxidation
  • The juices at the end of the pressing are better protected and more valuable

Optimised pressing

  • Speed between pressing cycles
  • Optimised filling time/volume with the EasyFillprogram as standard
  • Choice of cycle depending on the profile sought
  • Savings in water and energy
  • The press can be used for skin maceration
  • Fewer winemaking additives used

Simple and intuitive to use

  • Ergonomic and intuitive Touch Press colourtouchscreen
  • Easy Press 2 smart cycle and end-of-pressmanagement as standard
  • Reduced handling by the operator
  • Complete and rapid emptying of pomace
  • Connected press for real-time remote information

Optimised washing

The automatic washing system integrated into the presses allows:

  • Fast and easy washing of the press with the Fast Press pierced grids with vertical slots (30 to 45 min)
  • Reduced water consumption
  • Shorter washing time at the end of the day

SP 240 600

Pneumatic axial feeding: feeding by grape pump. 
Optimisation via EasyFill program controlled by Touch Press screen.

Gravity or conveyor feeding: door feeding (1 or 2 doors).

The innovative design of the SMART PRESS offers a number of improvements:

  • The Fast Press drainage grids allow for better drainageand easier washing
  • Increase drainage surface
  • Optimised filling capacity, complemented by theEasyFill program
  • Rapid pressing: up to 1 hour less than a conventionaldrain press (depending on the grape varietal, maturity,and health of the grapes and the press fill rate).

The integrated automatic washing systems allow the press to be washed in 30 to 45 minutes. The fast grid opening system makes it easier to thoroughly wash the tank.

The membrane is made of food-grade polyurethane material with both sides complying with EC/FDA food standards, allowing pressing with a very small quantity of harvest. An air diffusion drain balances the pressure on the membrane. 
A coil brings the pomace to the doors for complete, fast draining of the press.
A technical access hatch (inspection hatch) facilitates access to the air part of the tank and maintenance of the membrane.

The intuitive Touch Press touchscreen interface and the Easy Press 2 smart pressing system simplify use from the outset:

  • Pressing cycles customised to meet the needs of the winery (logistics, quality, etc.)
  • Modification of the pressing program in real time
  • Save programmes (in advanced mode) on a USB flashdrive for perfect traceability
  • EASY PRESS automatic pressing cycle according to2 simple criteria: quality and dryness of the pomace
  • Real-time information on possible anomalies forincreased operator responsiveness

1.Advanced (customisable)

  • Programming of the different pressing phases by the operator: pressure, hold time, number of breaking-up cycles
  • 20 programs with 99 possible programming lines

2.Easy Press 2 (smart)

  • The automatic controller manages the pressingcycles according to the juice runoff and the end ofthe cycles depending on the desired degree of drying.The operator adjusts these 2 criteria called "quality"and "dryness" on the Touch Press screen.
  • Pressing time and number of breaking up cyclesoptimised
  • Improved quality of extracted juices
  • Pressing stops according to the pomace drying rate
  • 5 predefined types of harvests: destemmed grapes,whole clusters, fermented pomace, damaged grapes, end of maceration

In addition to Ingas, it is possible to inject a neutral gas (nitrogen or CO2) during crumbling in order to obtain optimal protection against must oxidation.

Manual must selection is programmable as standard: at each stage set by the operator, the press stops and sounds an alarm while waiting for authorisation to move on to the next stage.
As an option, the automated juice selector directs must to 2 channels according to criteria defined by the oenologist: phases of the pressing cycle, elapsed time, conductivity. The conductivity probe positioned at the juice collector's outlet ensures a qualitative juice selection based on the conductivity of the juice flowing out.

Pressing cycle controlled according to juice flow. Programming via Touch Press screen.

Optional, find out more about the connected wine press.

Systems controlled by the PLC via the Touch Press screen. Find out more about ENOXY + and INGAS.

 SPC CLOSED CAGE
Tank capacity (hl) 240320480600
Min. quantity0 kg
Door feeding1 or 2 independent motorised airtight doors
Axial feeding with full capacity detectoro  Ø 150
Juice run-offThree outlets, flowing directly into the closed juice tank o Pneumatic valves
Automatic washing cycle
FAST PRESS drainage grid
Fast Press electropolished gridso
ingaso
ENOXY +o
Manhole
Advanced Pressing Cycle
Easy Press 2 smart pressing cycle
Touch Press colour touchscreen console
Membranes  High density polyester weave coated with polyurethane. FDA/EEC 1227 food-grade quality

● as standard  o available as an option - not available

SPC 240 - 600 CLOSED CAGE
MODELSSPC 240SPC 320SPC 480SPC 600
A6.88.39.410.90
B333.53.5
C333.53.5
D3.53.54.24.2
E0.80.80.80.8
Perform6.37.58.910.4
Number of doors1 or 21 or 21 or 21 or 2
Ø axial feeding0.150.150.150.15
Weight (kg)8400100001200015,500
Vat volume (hl)240320480600
Whole grape capacity (kg)12000160002400030000
Destemmed grape capacity (kg)6000080000120000150000
Fermented pomace capacity (kg)700001000001500001800000
Drainage time2 h - 2 h 302 h - 2 h 302 h 15 - 2 h 452 h 15 - 2 h 45
Emptying time20-30 min20-30 min20-30 min20-30 min
Base power (kW)242837.537.5

 

“We opted for four Smart Press SPC 600 machines because their grape pressing technology is so much more advanced. We also rearranged the layout of the winery so that we can now take in up to 900 metric tons each day. We couldn’t have got the machines up and running properly without the support provided by PELLENC PERA ŒNOPROCESS before and after we installed them.”

Joel Julien, Director of the,
Costières de Pomérols winery, Hérault, France
Also see our...
Pressing
SPC 20 30
The closed cage pneumatic press for small harvests
Find out more
Pressing
SPC 40 150
The high-quality, smart and connected closed-cage pneumatic press
Find out more
Pressing
SPC 4000 12000
The high-quality, closed cage pneumatic press, adapted to the needs of Champenois winegrowers 
Find out more
Pressing
SPO 40 150
The high-quality, smart and connected open cage pneumatic press
Find out more
Find a dealer

Our experts are on hand to answer all your questions. Find your local dealer now.


SEARCH