Solerion solar charger
Standard and quick chargers
An exceptional service life
Intelligent charge system that optimises the service life. Batteries enter a discharge cycle after 10 days of non-use, for optimal storage for 24 months. You just need to remember to store the batteries fully charged. PELLENC lithium-ion batteries do not suffer from memory run-down.
Charger and battery charge time
|1.2 A standard charger||9h||15h||22h||9h|
|2.2 A standard charger||5h||8h||12h||5h|
|Quick Charger||1 h 30 min|
(starting in 2016)
|SOLERION: with low insolation||4h||6h40||11h||5h|
|SOLERION: with normal insolation||3h||3h30||5h||2h40|
*Charging time calculated in optimal conditions. Refer to the battery instructions for conditions.
Power Convertor 1000
The converter that transforms the battery voltage to 230 Vac.
Combined with a PELLENC battery, the POWER CONVERTOR 1000 is the solution for storing and using electrical energy. Thanks to this product, all electrical appliances below 1000 W can operate autonomously: domestic appliances, drills, jackhammers, etc… The output voltage is pure sine wave (as on any electrical distribution network) to enable asynchronous motor control.
|SINE WAVE POWER CONVERTOR 1000|
|Rated power – W||1000|
|Rated power over 1 second – W||2000|
|Input voltage (Pellenc battery) – Vd||36 – 52|
|Maximum input voltage – A||55|
|Pure sine wave output voltage – Vac +/- 5 %||230|
|Output current to 1000 W maximum – A||4,5|
|Switchable output frequency – Hz||50/60|
|Weight – Kg||2,7|
|Battery compatibility||ULIB 700, ULIB 1100, Poly 5|
Caution : do not connect the Power Convertor 1000 to an electrical distribution network.