HELION Hedge Trimmer
trimmers are efficient tools that meet the needs of professionals in terms of power and trimming quality. Their odourless operation and light weight allow the user to work comfortably when trimming hedges, ornamental trees and also for pruning with the new HELION 2 COMPACT.
Professional
- NEW: Cutting power designed for pruning and finishing HELION 2 COMPACT.
- Anti-locking blades system.
- NEW: Fast Connector System: for rapid tool connection and disconnection HELION 2 COMPACT.
- Best compromise between vibrations/cutting capacity.
- Enough battery life for a full day’s work.
- NEW: Waterproofing level of IP 54 HELION 2 COMPACT
Environment
- Work quietly.
- Odourless and pollution-free operation.
- Zero emissions and zero waste.
Ergonomic
- Soft Touch rotating handgrip.
- Its light weight improves working conditions.
- Quick Switch system with four types of interchangeable cutter bars on the same engine.
- NEW: Retractable trigger HELION 2 COMPACT
Cost-effective
- At least €8 in petrol saved per day.
- 1 motor with different blade sizes.
- Low maintenance.
- No use of blended fuel.
- Multi-purpose battery
I invested in a pair of pruning shears and a hedge trimmer and I do not regret it at all. The hedge trimmer is comfortable and even allows me to work near homes.
Mr. Vignaud – Landscaper in L’Isle d’Espagnac, France
A range of light-weight, very accurate hedge cutters
Fast Connector System
On the HELION 2 COMPACT, the Fast Connector allows for rapid connection and disconnection of the tool to and from the battery when working—a key safety element that allows you to quickly get out of any risky or uncomfortable situation.
High performance sharpening
The protector on the HELION 2 COMPACT, easily disassembles for rapid sharpening of the blades.
Flexible head
On the pole models, the head is adjustable by +90°/-45°, which means you can trim in all positions.
Rotating handle
The handle is adjustable by +/- 90° for vertical work without bending the handle.
Anti-locking system
A unique device reverses the motor’s direction of rotation if the blade gets caught in the vegetation. This enables it to be easily removed and prevents the blades from twisting or breaking.
Optimised power and battery life
The 4 speeds make it possible to adapt the speed to the type of vegetation. Good management of the selector also saves on battery use.
Robust cutter bar
Composed of light weight and robust materials: The stiffener is in aluminium and the blade is in high carbon steel.
Quick Switch
All cutter bars are universal and easily interchangeable. The mounting and removal of the cutter bar takes less than a minute.
Carbon footprint
PELLENC professional power tools eliminate nearly 99% of direct emissions of greenhouse gases compared with a combustion engine, namely, 86 times less. And, if you recharge your PELLENC batteries with our Solerion solar charger, CO2 emissions are completely eliminated.
| COMBUSTION ENGINE HEDGE TRIMMER Direct emissions + petrol production | HELION Direct emissions + electricity production | WITH SOLERION Direct emissions | |
|---|---|---|---|
| Carbon equivalent/day | 55.1 lbs CO2/day | 4.87 oz CO2/day | 0 oz CO2/day |
Data: 1kWh EDF corresponds on average to a carbon equivalent of 3.17 oz CO2/kWh in France, covering production and the remainder of its life (ADEME-France) — 35.2 oz of SP95 super fuel has a carbon equivalent of 25.06 lb CO2/gal in direct emissions and 55.12 lb CO2/gal in production + direct emissions — Basis: 6 h working day and 200 annual working days.
Models
 Standard equipment.
|  |  |
| Compact 2 | Telescopic | |
|---|---|---|
| Maximum power – W | 1200 | 1200 |
| Combustion engine equivalence – in³ | 1.83 | 1.83 |
| Weight (with a 24.8 in blade) – lbs | 7.7 | 9.5 |
| Pole length – in | – | 59.05 in – 78.74 in |
| Cutting rate – cuts/min | 3 200 to 3 800 | 3 200 to 3 800 |
| Available cutting length – in | 10.6 – 20.1 – 24.8 (with/without deflector) – 29.5 in | 10.6 – 20.1 – 24.8 – 29.5 in |
| Tooth spacing – in | 1.57 | 1.57 |
| Tooth height – in | 0.95 | 0.95 |
| 5-notch rotating handle | +/-90° | – |
| Multi-position pivoting cutting head | – | +85°/-45° |
| Noise level (LPA)* – dB(A) | 84 | 83 |
| Guaranteed noise level (LWA)* – dB(A) | 92 | 96 |
| Front handle vibration level (ah)** – ft/s² | 8.5 | 12.8 |
| Rear handle vibration level (ah)** – ft/s² | 9.8 | 11.15 |
| Quick Switch | | |
| Fast Connector | | – |
| 4-speed selector switch | | |
| Belt carrying kit | – | |
| Harness carrying kit | – | |
| Battery life**** with ULiB 1100, | Up to 2 days | Up to 2 days |
Optional equipmentAccessories & consumables
HELION 2 Compact cutter bars
27 cm – ref. 57096
51 cm – ref. 56205
63 cm – ref. 56206
75 cm – ref. 56207
Deflector (adaptable on the 63 cm cutter bar) – ref. 57097
Pole, telescopic and universal cutter bars
27 cm – ref. 57029
51 cm – ref. 56202
63 cm – ref. 56203
75 cm – ref. 56204
63D (deflector integrated with the cutter bar) ref. 57009
Harness carrying kit
Improves working comfort – attaches to the battery harness.
ref.: 79297
Belt carrying kit
Improves comfort while working– attaches to the belt.
ref.: 74668
Counterweight
For better balance of the hedge trimmer pole.
ref.: 86669
10.30 m extension cord
33.8 ft male/female lead allowing you to work with the battery on the ground. Only works with Helion.
ref.: 100994
Biodegradable cleaner for resin
For cleaning and lubricating the cutting elements, contains 400 ml.
For cutter bars with a carbon stiffener, ref: 73974
For cutter bars with an aluminium stiffener, ref: 121633
Grease cartridge
400 g cartridge for lubricating the cutter bar gear.
ref.: 115174
Grease gun
ref.: 68518
