Airion 3 handheld blower
Weighing 2.55 kg, and with a patented design, the Airion 3 blower is easy to use and durable in any climate conditions. Designed to meet professional demands for reliability, power and efficiency, the Airion 3 blower can also be used for several hours without fatigue or tension, especially in the wrist. Quiet and powerful, it is effective in an urban setting, near sensitive areas, and in parks and gardens.
Ergonomic
- The tool stays perfectly balanced during operation, regardless of the speed.
- The lightest hand blower: 2.55 kg with the actual weight of the cable held in the hand.
- Maximum MSD (musculo-skeletal disorder) through respect for vertical axis of work, from shoulder to wrist.
- Angled suction to overcome the swing phenomenon and reduce effort.
Productive
- Effective unmatched thrust of 17.5 N
- Actual air flow of 920 m3/h with the round nozzle.
- 4 interchangeable nozzles for different uses.
- Comfortable when working for long periods with optimal balance.
- Battery life remaining shown by pressing on the speed selector switch (1 to 4 LEDs).
Silent
- Angled suction keeps noise levels low for local residents
- Only 79 dB
- Golden decibel award 2011 (Conseil National du Bruit).
- No need to wear noise protection helmet.
- Use in sensitive areas at any time of day.
Durable
- Sealing level IP54 protecting it from dust and rain.
- Tough turbine body in magnesium alloy, optimising its service life.
- Tough PP copolymer intake and outlet hoses, for greater shock resistance (15 joules).
Prizes and Awards
Innovation Award: EIMA INTERNATIONAL – 2017
Décibel d’or: CONSEIL NATIONAL DU BRUIT – 2011
The low noise level is its greatest advantage. Its second strong point is how easy it is on the user, in particular thanks to the lightweight tool and battery. The comfortable harness spreads the load well, reducing the strain on the user and boosting productivity. The battery packs a lot of power. We use it 90% of the time, for all the usual kinds of garden work. The added bonus of the Airion 3 is the quick-connect power system, which can be unplugged if you need to put the tool down. It also lets you work safely, as it disconnects itself if it gets caught up during use.
Laure FANCUILLO – Principal landscape designer, Jardins SESTIAN – France
Angled suction: a decisive factor
The tip of the blower is pushed down by the force of the outgoing air, so the wrist has to make an effort to lift it. With its angled intake, the Airion 3 compensates for this phenomenon – unlike conventional straight blowers, which exacerbate the problem.
Pellenc advantages
Quick-connect system
Lets you quickly plug and unplug the battery connection during use. This important safety feature lets you get out of any risky or uncomfortable situation fast.
Battery life indicator
When you press on the speed selector, the LEDs flash and display the remaining battery life in 25% steps.
Intake grill
The new patented air-intake design dramatically improves user comfort and reduces the noise generated by the tool.
Speed control
The Airion 3 speed controller lets you increase or decrease the blowing power according to the surface to be cleared. The boost function delivers maximum air flow and is activated simply by holding down the button. The Airion 3 is powerful enough to budge heavy objects, such as large masses of wet leaves stuck to the ground.
Durable motor
Protected against dust and moisture and 100% rain-proof, the Airion 3 is designed to withstand the test of time. Its motor is encased in a magnesiumalloy body, ensuring good heat dissipation, full IP54 sealing, and a longer operating life. All the mechanical parts are protected from dust and moisture.
Technical characteristics
 Standard equipment |  |
| AIRION 3 | |
|---|---|
| Effective thrust* (N) | 17,5 (boost) / 13,5 (speed 4) |
| Maximum power – W | 940 |
| Weight of the tool with cable– kg | 2,7 |
| Weight of the tool without the cable– kg | 2,45 |
| Actual weight of the tool in use– kg | 2,55 |
| Actual airflow rate with round nozzle** – m3/h | 920 (boost) / 815 (speed 4) |
| Maximum airflow speed with the round nozzle** – m/s | 63 (boost) / 55 (speed 4) |
| Maximum airflow speed with flat nozzle– m/s | 69 (boost) / 60 (speed 4) |
| Noise level (LpA)*** – dB(A)) | 79 |
| Guaranteed sound level (LWA)*** – dB(A) | 92 |
| Sound pressure at 15 metres*– dB(A) | less than 65 |
| Vibration level**** – m/s² | below 2,5 (0,5 actual) |
| Battery life***** with ULiB 1100 | Up to 6 hrs |
| 4-speed selector switch + boost | |
| Round nozzle | |
* Standard according to ANSI/OPEI B175.2-2012.
** With nozzle diameter of 75 mm.
*** Values determined according to the acoustic measurement standards NF EN ISO 11203, NF EN ISO 3744 and NF EN ISO 4871.
**** Vibration emission value according to NF EN 60745-1: 2009– Kd uncertainty = 1.5 m/s2
****** For information: the times were observed in actual working time, including breaks. Battery life is influenced by the nature of the work carried out.
Accessories & consumables
Round blowing nozzle 65 mm
Best compromise between speed and air flow. Can be used with AIRION 1 and AIRION 2.
Inner diameter of the nozzle: Ø 65 mm
Length of the nozzle: 57 cm
Ref.: 83326
Round blowing nozzle 75 mm
For ideal performance combining speed and air flow. Can be used with AIRION 1 and AIRION 2.
Inner diameter of the nozzle: Ø 75 mm
Length of the nozzle: 57 cm
Sold as standard
Ref.: 122863
Nozzle with integrated scraper
For lifting and removing all sticky or wet waste. Can be used with AIRION 1 and AIRION 2.
Inner diameter of the nozzle: Ø 65 mm
Length of the nozzle: 57 cm
Ref.: 102930
Flat nozzle
Designed for precision work.
Total length of the nozzle: 77 cm
Ref.: 122865
ERGO nozzle
Improves ergonomics and comfort for user in the long term.
Adaptable for Airion 2
Angled nozzle: Ø 78 mm, overall length: 70 cm
Ref.: 131967
Composite propeller
Removable propeller.
Ref.: 83301
Carrying strap
The harness further reduces the carrying weight.
Kit incorporating the strap and hook for attaching to the blower on the left or right side
Ref.: 110001
Tool carrying hook
A hook which clips to the battery belt so that the operator can have free hands.
Ref.: 86708
