PR – September 04th 2018 – This new range of 5 tow grape harvesting machines was designed to meet the needs of professionals. The GRAPES’LINE 40, 45, 60, 70 and 80 ranges integrate PELLENC’s latest technological innovations for machine shaking, conveying, sorting and driving. They offer the same grape harvesting quality and exceptional driving comfort.
The PELLENC tying machine simplifies the work with its accelerated tying: up to 12,000 ties per day with no effort. It easily and quickly carries out a job that is often long and tedious.
Attaching vines has become quick and easy since I started using the Fixion tying machine. Before that, this was difficult and often exhausting work. PELLENC ties are excellent. They are very strong and easy to attach. I can tie vines for an entire day with two reels of ties and a single battery charge.
Mr. ALBERTO TEBALDI – Vine Grower, Italy
Breaks down after 10 to 12 months of use according to climatic conditions, load, and quality of the trellising wire.
Standard tie
Steel wire 0.44 mm
Average tie strength =14 kg*
Breaks down after 8 to 10 months depending on use. The photodegradable additive accelerates breakdown of the envelope, which favours attachment.
Biodegradable tie
Steel wire 0.44 mm
Average tie strength =14 kg*
Slow breakdown. Use for cordon system vines and the installation of irrigation pipes.
Stainless-steel tie
Stainless steel wire 0.44 mm
Average tie strength =14 kg*
Breaks down after 6 to 9 months depending on use. The paper retains moisture, which favours the breakdown of the tie.
0.36 Paper tie
Steel wire 0.36 mm
Average tie strength =9 kg*
Breaks down after 6 to 9 months depending on use. The paper retains moisture, which favours the breakdown of the tie.
Paper Tie
Steel wire 0.44 mm
Average tie strength =14 kg*
 Standard equipment.
|  |
| FIXION | |
|---|---|
| Weight – g | 900 |
| Battery weight – kg | 2 |
| Maximum tying diameter – mm | 25 |
| Reel length – m | 200 |
| Ties per reel – | 1550 |
| Noise level (LPA)* – dB(A) | ≤ 70 |
| Guaranteed noise level (LWA)* – dB(A) | ≤ 81 |
| Vibration level (ah)** – m/s² | ≤ 2,5 |
| Compatibility of PELLENC ties | |
| Battery specific to Fixion | |
| Carrying case | |
| Battery life*** | Up to 12,000 fasteners |
* Values of acoustic measures according to the Directive EN 60745-1: 2009 + A11: 2010 – uncertainty according to ISO4871 = 3dB
** Vibration emission values according to EN60745-1: 2009 + A11: 2010 – Uncertainty = 1.5m/s²
*** For information: the times were given in actual working time, without taking breaks into consideration. Battery life is influenced by the nature of the work.
ref.: 57047
Standard Tie
ref.: 57050
Expandable Tie
ref.: 57053
Stainless-steel tie
ref.: 57048
Biodegradable Tie
ref.: 57052
Paper Tie
ref.: 57050
0.36 Paper Tie
ref.: 101605
FIXION maintenance kit
With the advent of the OPTIMUM range, PELLENC puts innovation at the service of excellence and performance, for a new approach to viticulture reconciling crop quality, respect for the environment, profitability, and ease of use. As such, each grower will find in the OPTIMUM range of harvesting machines and the multifunction carrier the equipment adapted to their needs as well as the specificities of its vineyard and its exploitation.
The new OPTIMUM harvester has won me over. The comfort of the cab is impressive, the EASY TOUCH touch console and the multi-function joystick control make driving intuitive and enjoyable. The manoeuvrability is impressive in the headland. I easily turn at the end of the rows, even on my most uneven and narrow plots. The quality of the harvest is excellent, the Flexible Sorter Conveyor works in perfect harmony with the Selectiv’ Process On Board 2. Sorting the harvest starts on the conveyor, which allows me to work faster while maintaining unmatched crop quality: 99.82 % cleanliness in the bin.
Patrick EXPERT – Domaine de LATRAOU, Cravencères – France
Spacious cab
Comfortable
Easy cabin access with a single click using the retractable electrically operated ladder. Panoramic field of view up to 310°. Lowest cab position on the market. 2 12V plugs. Plenty of storage space and automatic air conditioning.
Ergonomic
Multiple, customisable settings: seat, armrest, mirrors, EASY TOUCH console, and steering column. The anti-vibration pneumatic seat with its ergonomic armrest and integrated EASY DRIVE joystick offer a healthy and relaxing position time after time.
Silent
Optimum is three times quieter. Cab mounted on silicone shockmounts that absorb vibrations.
Now with gradual acceleration using EASY DRIVE
Accessible to all
Joystick on a fixed pivot: the driver no longer moves his arm, piloting is done by impulse or continuous pressing.
Instant reset and change of direction in a single movement.
Ergonomic and practical with backlit keys.
EASY TOUCH touch console
Adjust all settings of the PELLENC Multifunction tools right from the cab.
Intuitive control and settings pictograms without text: only one screen for managing all machine functions.
With EASY SMART, adjust all the harvesting settings directly.
EASY TOUCH also incorporates the guide lights for the rows, speed regulator, and acreage counter.
Driver assistance
Safety inclinometer for automatic tilt correction.
Automatic centring of the ACTIV’ head in the row with stop indicator in the cab.
Ground detection with automatic lifting.
Programmable height stops: position: working, headland, and road position.
Secure cab
The cab complies with anti-crush standards (ROPS 4: Roll Over Protection Structure).
Equipped with break glass hammer, sun visor, fire extinguisher, dual position rear-view mirror, two point seat belt and presence sensors.
Split, electric wide-angle side-view mirror, adjustable in width.
Pressurized cabin meets the EN 15695-1 and NF EN 15695-2 standards.
5 emergency stops
One on the armrest: Shuts down the tool/harvesting head. 1 on the steering column: full machine shut-down (including motor). 3 emergency stops on the harvesting head: above each lower suction fan and on the cleaning remote control. 1 battery switch that is easily accessible.
Automatic parking brake
The parking brake is turned on and off automatically when the machine stops and restarts.
Visibility night and day
12 standard lights including 2 directional lights + 2 optional LED lights. 2 colour cameras with night vision and an independent screen embedded in the EASY TOUCH console.
New Perkins Tier IVi motor is simple and efficient providing up to 43% fuel saving per hectare!
Optimisation of every drop of fuel:
– EASY POWER: automatic engine speed control based on the hydraulic requirements of the machine.
– Speed controller/limiter.
– Intercooler: cools the air entering the engine.
– Maximum torque of 1,600 rpm.
A working day without refuelling thanks to an available tank volume of 190 L (500 and 600 model) or 260 L (700/800 model).
The new TIER IV i motor is 10 times less polluting than a Tier III engine! It significantly reduces emissions through the EGR valve that recycles exhaust gas and the Particle Filter that traps and destroys harmful particles.
The most compact carrier on the market:
Easy to handle
Low centre of gravity for gradients and slopes (slope clearing of 28% to 32 % depending on the model).
Easy travelling on roads and paths.
Multifunction power/weight ratio is similar to that of an in-row tractor with the added advantage of having the wheels in the middle of the row.
EASY TURN steering
Unmatched, 95° turning angle, for perfect handling in the headlands: work row after row without manoeuvring.
The rear inside wheel reverses to reduce the space needed for manoeuvring in the headland.
Continuous All-wheel-drive system TPI 2
Pellenc motor with 4 independent wheels.
Ensures smooth driving without skating in forward or reverse, or when turning in the headland.
Quick access at shoulder height, without the need for tools on any maintenance areas, lubrication, and the different filters: air, fuel, and oils (hydraulic and motor). Removable lateral scale provided. Less lubrication needed: 1 x 20 h shaking and 1 x 200 h Selectiv’ Process and carrier.
Quick and easy maintenance
Easy and reduced maintenance of the flexible sorter conveyor: all of the elements of the flexible sorter conveyor can be replaced and are installed on interchangeable Teflon® runners.
Semi-automatic tension without tools for the Flexible Sorter Conveyor.
Permanent self-diagnostics signalled in the cab.
Pre-diagnostics for the After Sales Service Department. The PELLENC Buscan technology ensures continuous communication between the EASY TOUCH console and the components.
Numerous access points: removable conveyor housings, sorting tables, sorters and retractable suction fans. Cleaning mode reduces cleaning time by 30 %. Can be activated from the cab or the remote console (on the cleaning platform). Can be used to retract the housings, sorting tables, sorters and suction fans. Remote control on the harvesting head. * (20 to 45 minutes depending on model).
Fast and easy cleaning*
Work more cost effectively with the pre-pruner. Its simplicity provides fast and efficient work, as well as low maintenance.
Its light weight allows us to work quickly in all our blocks. Its small footprint together with the reduced overhang makes it extremely stable on slopes. Maintenance is fast and simple, and it offers excellent visibility. What a comfort! It does its job well, performing quality work regardless of the amount of wood in the row, and without special wear considering the 667.2 acres worked.
Alain BONNELLY – Domaine le Coulet Rouge, 84220 Roussillon
Lateral cutter bars (60 cm high) cut hanging branches.
Lateral cutter bars available as an option
This option saves substantial amounts of time when pruning.
Working comfort of the driver: when working at night, in the rain, under the sun.
Automatic detection of posts and cordon tracking by machine vision
Quality work without the stress.
PELLENC boron steel discs have an extended lifetime and require not sharpening.
Boron steel disc
MULTIVITI coupling.
3 minutes to change tools
| Standard equipment.
|  |  |  |  |
| PCD 00 | TLVP | PCD Multiviti | PLD Multiviti | |
|---|---|---|---|---|
| Head with | Short arms | Long arms | Short arms | Long arms |
| Number of pairs of bevelled discs with 100 mm spacing | 3 to 6 | Up to 11 | 3 to 6 | 5 to 9 pairs |
| Number of pairs of bevelled discs with 50 mm spacing | 6 to 11 | Up to 21 | 6 to 11 | 10 to 17 pairs |
| Pairs of 3.9 in long lateral cutting bars | – | | – | |
| Pairs of 17.7 in diameter lateral discs | – | | – | – |
| Coupling | On over-row tractor | Multifunction arm on Pellenc carrier | Multiviti 20 or 40 frame | Multiviti 20 or 40 frame |
| Manual speed adjustment | | From the console | From the console | From the console |
| Electric control of all functions | | | | |
| Height and angle settings controlled by hydraulic cylinders | – | Multifunction arm | Multiviti frame | Multiviti frame |
| Automatic Vision post detection | | | | |
| Automatic cordon tracking with the vision system | – | | – | |
| Hydraulic tilting, for Lyre vines | – | – | | |
| Pair of opening wheels |  | – | | |
| Suspension strap slope/safety | | – | Multiviti frame | Multiviti frame |
| Delivered on a pallet stand | | | | |
Work fast and efficiently, even in dense vegetation with the semi-automatic pruner! Thanks to its Visionic technology (optional), this pruner works at high speed and provides cutting and mulching quality superior to that of disc models.
Coupling the VISIO with the MULTIVITI chassis is fast and simple: 3 minutes are all that are needed to couple and plug in the connexions. The automatic opening around posts makes it possible to comfortably and safely carry out pre-pruning at 3.1 MPH. The retracting safety system with automatic reset of the head optimises the work rate!
We also applaud the low maintenance requirements of the machine.
Ludovic LEHERLE – SCEA Chateau Queyret Pouillac, 33790 Saint Antoine De Queyret
Stake detector. Does not damage stakes and vegetation.
Visio: artificial vision system
Forward speed up to 5 MPH.
Working comfort of the driver: when working at night, in the rain, under the sun.
Quality work without the stress.
Quality of work higher than can be achieved with manual operation.
Runs alongside the cordon with the vision system
Greater vine protection.
Exceptional operator comfort.
The result is similar to final pruning thanks to the work of the lower discs.
No more wood removal.
“Marguerite” discs
No more collecting branches on the ground.
Fine mulching.
Long lifespan.
Lateral cutter bars (23.6 in high) cut hanging branches without projections.
Lateral cutter bars available as an option
Get closer with the Precision pruner by combining Visio and lower and lateral discs:
Bottom and lateral discs
“Pruning shear” type cutting.
Unrivalled cutting quality.
| Standard equipment.
|  |  |  |  |  |  |
| TLV MD MULTIVITI | TLV HD MULTIVITI | TCV MULTIVITI | TCV 00 | TLV 00 HD TURBO | TLVP | |
|---|---|---|---|---|---|---|
| Head with | Long arms | Long arms | Short arms | Short arms | Long arms | Long arms |
| Number of pairs of mulching discs | 5 to 9 | 7 to 9 | 3 to 6 | 3 to 6 | 7 to 9 | up to 11 |
| Pairs of 23.6 in long lateral cutting bars | | | – | – | – | |
| Pairs of 17.7 in diameter lateral discs | – | | – | – | | |
| Pair of lower discs | | | – | – | | |
| Coupling | Frontal MULTIVITI | Frontal MULTIVITI | Frontal MULTIVITI | Straddle tractor | Multifunction arm on Pellenc carrier | Multifunction arm on Pellenc carrier |
| Fast coupling fitting and stay-bars | | | | – | – | – |
| Manual speed adjustment | From the console | From the console | From the console | | From the console | From the console |
| Electric control of all functions | | | | | | |
| Height and angle settings controlled by hydraulic cylinders | | | | – | Carrier | Carrier |
| Automatic Vision post detection | | | | | – | |
| Automatic cordon tracking with the vision system | | – | | | – | |
| Hydraulic tilting, for Lyre vines | | | | – | – | – |
| Pair of opening wheels | | | | | | – |
| Suspension strap slope/safety | MULTIVITI | MULTIVITI | MULTIVITI | | Pellenc multifunction arm | Pellenc multifunction arm |
| Impact-proof cylinder | | | | – | | |
| Delivered on a pallet stand | | | | | | |
| Independent hydraulic unit | | | | | – | – |
| Hydraulic output (l/min) | 35 | 45 | 25 | 25 | Carrier | Carrier |
Up to 90 % less time spent pruning. PELLENC Visio cordon technology: cut vine shoots in the perfect place and with precision.
The PELLENC TRP™ allows us to quickly prune the 130 hectares of the two estates, while significantly reducing costs and workforce management. While working, we particularly appreciate the clean cutting quality with a forward speed of 3 to 3.5 km/h. We cut 1.5 ha in 1.5 h using one tractor and driver. Hour after hour the efficiency of cordon tracking by artificial vision is constant; pruning is conducted efficiently and without fatigue!
Christophe ROBILLOU and Ludovic DUCLOUX – Buttignol Nelly Vineyard and Rebillou Vineyard, Saint Félix de Fontcaude – France
Hydraulic flow required: only 7.7 gal/min.
Hydraulic engine
High-speed saws.
Cutting quality.
Prunes large diameter branches easily.
Wear resistance.
Quality of work higher than can be achieved with manual operation.
Row tracking with automatic vision
Greater vine protection.
Exceptional operator comfort.
Large entrance opening of the row (20.5 in).
Lateral module Precision pruner with variable angle
hydraulically operated.
Manoeuvrability in short headlands.
Cleaning efficiency.
Lateral deflector prongs prevent injuries on the cordon.
| Standard equipment.
|  |  |  |
| TRP/P | PL-TRP vision/P | TRP MULTIVITI | |
|---|---|---|---|
| Head with | – | Long arms | – |
| Number of pairs of bevelled discs | – | 10 to 17 pairs | – |
| 2 lateral hydraulic cutting modules 1 pair of 15.7 in diameter steel saws | | | |
| 2 horizontal hydraulic cutting modules 1 pair of 13.8 in diameter steel saws | | | |
| Coupling | Multifunction arm on Pellenc carrier | Multifunction arm on Pellenc carrier | MULTIVITI chassis |
| Fast coupling plate and stay-bars | – | – | |
| Manual speed adjustment | From the console | From the console | From the console |
| Electric control of all functions | | | |
| Height and angle settings controlled by hydraulic cylinders | – | – | |
| Pair of opening skids of the horizontal cutting modules | | | |
| Automatic cordon tracking with the visioning system | | | |
| Impact-proof cylinder | | | |
| Delivered on a pallet stand | | | |
| Pair of deflector fingers for vertical modules | | | |
On narrow or wide vines, spray 3 to 6 rows at the same time. Carry out spraying with the help of pneumatic and air jet sprayers and take advantage of the Eole 2’s automated systems.
We treat four full rows at once. The ultrasonic ground tracking ensures optimal positioning of the sprayers on sloped and uneven terrain. Since the distance is kept even between the diffuser and the plant canopy, the consistency and quality of the application is very good. We also appreciate Flow-rate Proportional to Forward speed function, which means that the flow rate of the dose per hectare is always respected regardless of the working conditions.
Christophe DELARGE – Chateau Eugenie, 46140 Albas – FRANCE
The pneumatic system allows for optimum micronisation. The motor speed control also allows you to save fuel, even in pneumatic mode.
Pneumatic or air-blast
The airblast system allows for limited drift and up to 30 % of diesel saved.
Folding / unfolding control with automatic width row spacing adjustment.
Unfolding and folding in one click
Row by row cut-off on all models, and outer half-rows on 4-row models from the cockpit.
The spraying boom with ultrasonic sensors follows the slope of the land and corrects the gradient by up to 30 %..
Ground tracking
Easy to use cruise control. The Flow-rate Proportional to Forward speed function continuously maintains the programmed spraying concentration, regardless of the working conditions. Settings are displayed on the Dickey John unit.
Flow control
| Standard equipment.
|  |  |  |  |
| Eole 4RE | Eole 6RE | Eole 3RL | Eole 4RL | |
|---|---|---|---|---|
| Tank capacity (in l) | 2 X 1000 | 2 X 1000 | 2 X 1000 | 2 X 1000 |
| Rinsing tank capacity (in l) | 2X 100 | 2X 100 | 2X 100 | 2X 100 |
| Number of rows sprayed per pass | 4 | 6 | 3 | 4 |
| Plantation width (in m) | 1,3 à 2 | 1,3 to 1,9 | 1,75 à 3,60 | 1,75 to 3 |
| Types of diffusers available based on the height of the vegetation to be sprayed | 1.60 m, 4 double nozzles | 1.20m, 3 double nozzles | 1.90m, 5 single nozzles | 1.60m, 4 double diffusers |
| Types of diffusers available based on the height of the vegetation to be sprayed | 1.90 m 5 double airblast diffusers | 1.60 m 4 double airblast diffusers | 2.1 m, 6 single nozzles | 1.90 m 5 double airblast diffusers |
| Type of diffuser available depending on the height of vegetation to be treated (arrays reserved for the treatment of goblet trained vines) | Overhead, 8 arrays, 4 nozzles | Overhead, 12 arrays, 3 nozzles | Overhead, 6 arrays, 4 nozzles | Overhead, 8 arrays, 4 nozzles |
| Solenoid valve spray cut-off (row by row), controlled from the cabin | | | | |
| Outer half-row cut-off | | – | – | |
| Manual cut-off of each nozzle | | | | |
| Automatic folding | | | | |
| Automatic ground tracking | | | | |
| Tank level indicator with digital display | | | | |
| Flow Rate Proportional to Forward Speed | | | | |
| Tank cleaning with rotating nozzles | | | | |
The new leaf remover is perfect for all vineyards, the work is done properly and uniformly, as if by hand. The simple design ensures quick and easy handling in addition to require little maintenance. The canopy is tracked by a sensor, which automatically manages the tool pressure on the trellising in real time—with no damage to the berries.
The PELLENC leaf remover is very simple to set up and function, and it took no time to learn to use it. Automatic tracking of the plant canopy increases the quality of removing without risk of damage to the berries. The swivel head ensures rapid passage in the headlands and also allows me to adjust the working height to each of my vineyard block. The folding position for transport is truly intelligent, and the visibility and comfort are indisputable. Even better, there is hardly any maintenance thanks to its simple design.
ETA ROMAIN PASCAL – Saint-Emilion, France
The sensor coming into contact with the vegetation automatically controls the position of the removing head to perfectly follow the plant canopy. Independent tracking of the right/left modules of the 1 complete row leaf remover.
Automatic tracking of the plant canopy
The ½ reversible row leaf remover can work to the left or right of the machine and allows quick rotation at the end of the row.
Modular
The full row leaf remover can also be coupled with the OPTIMUM carrier.
Adaptable on the Optimum carrier
The row tracking sensor of the SOFT TOUCH leaf remover guarantees complete respect for the grape with its large area of action and a constant leaf removing rate thanks to its high responsiveness. The driver focuses on driving only, Soft Touch does the rest.
Removing quality like that done by hand
The suction roller is placed next to a feed roller. They rotate in opposite directions, grabbing the leaves. The leaves remain whole since they do not pass through the turbine.
No maintenance during the day
A roller brush at the rear cleans the 2 rollers to limit plant and debris deposits, ejects the leaves on the ground without projecting them toward the grapes.
| Standard equipment.
|  | |
| Reversible half row | 1 row | |
|---|---|---|
| Minimum row width – m | 1,5 | 1,30 m on the multifunction carrier |
| Number of rows | 1/2 | 1 |
| Hydraulic output required – min. | 35 L | 45 L |
| Coupling system | Front coupling head on tractor | Multifunction carrier |
| Offset settings | | |
| Removing height – mm | 380 or 480 | 380 or 480 |
| Electric controls on all functions | | |
| Row tracking by sensor | | |
| Safety: Hydraulic cut-off | | |
| Delivered on a pallet stand | | |
The Panorama trimmer offers great visibility. Robust and reliable, it comes in two models: Panorama with cutter bars and Panorama with blades. The hydraulically adjustable chassis means you can customise the cutting width with a single click.
In my opinion, the main strength of the PANORAMA trimmer is its simplicity, both technically and visually. No parts stick out of the chassis and casings and visibility of the cutting elements is excellent. I can work faster while limiting the risk of hanging on a stump. The hydraulic transmission is simple and especially reliable! The precision of steering in the row is very good, the reduced front overhang allows the machine to be positioned accurately relative to the row.
Frédéric AMOURDEDIEU – Provence Region, Villelaure – FRANCE
Wide range of settings of the PANORAMA chassis for working effectively in all vineyard configurations.
Large number of settings
Comes standard with a multifunction joystick.
Intuitive controls
1-click control of all functions of the trimmer.
Folding of the horizontal cutting modules without tools for quick and safe road transport.
Folds without tools
Panoramic view of the rows and the trimmer at work.
Panoramic view
Quick pivot vertical cutting bars work efficiently on slopes.
Work efficiently on slopes.
| Standard equipment.
| ||||
| PANORAMA EC narrow with blades | PANORAMA LC wide blades | PANORAMA EB narrow with reciprocating cutter bars | PANORAMA LB wide with reciprocating cutter bars | |
|---|---|---|---|---|
| Cutting width (in m) | 0,98 à 2,15 | 1,21 to 2,86 | 0,89 to 2,03 | 1,09 to 2,74 |
| Standard vertical cutter bars | 1.38 m with 4 blades | 1.38 m with 4 blades | 1,50 m BALT 1500 | 1,80 m BALT 1800 |
| Option 1 vertical cutter bars | 1,72 m with 5 blades | 1.72 m with 5 blades | 1,80 m BALT 1800 | 1,50 m BALT 1500 |
| Horizontal cutting bars | 0,73 m with 2 blades | 0,73 m with 2 blades | 0,90 m BALT 900 | 0,90 BALT 900 |
| Cut-off on impact ensures safety at all times | | | | |
| Control joystick | | | | |
| Height and hydraulic spacing adjustment hydraulique | | | | |
| Manual height adjustment of horizontal bars | | | | |
| Hydraulic height adjustment of horizontal cutter bars | | | | |
| Mounting plate and stay-rod | | | | |
| Delivery on a pallet stand | | | | |
| Working close to the ground (optional) | Fifth lower cutting module (fixed or pivoting) | Fifth lower cutting module (fixed or pivoting) | Vegetation lifter | Vegetation lifter |
The Multiviti trimmer is quick and simple to use. Coupling and uncoupling is completed without tools.
The trimmer on a MULTIVITI chassis offers the advantage of being controlled by the Pellenc MULTIVITI joystick, which I find ergonomic and easy to use. The drive is simple and robust, and the machine requires little power and maintenance. I am pleased to say that thanks to the Mutiviti trimmer I save time in the vineyard as well as in the workshop!
Christian and Jean-François OTT – Domaine OTT, Château de Selle, Taradeau – FRANCE
Hydraulic and electrical connections are made rapidly and are located at shoulder height.
Quick coupling in just 3 minutes
Automatic tool recognition for the MULTIVITI Joystick.
Comes standard with a multifunction joystick.
Intuitive controls
1-click control of all functions of the trimmer.
| Standard equipment.
| ||
| MULTIVITI C (Blades) | MULTIVITI B (Reciprocating cutter bars) | |
|---|---|---|
| Cutting width (in m) | 0,3 to 1 | 0,3 to 1,2 |
| Standard vertical cutter bars | 1,38 m with 4 blades | 1,8 m BALT 1800 |
| Option 1 vertical cutter bars | 1,72 m with 5 blades | 1,5 m BALT 1500 |
| Horizontal cutting bars | 1,05 m with 3 blades | 0.7 m: 1 Evoludisc 700 satellite |
| Optional horizontal cutting bar | – | 1.2 m: 2 Evoludisc 600 satellites |
| Cut-off on impact ensures safety at all times | | |
| Control joystick | | |
| Height and hydraulic offset adjustment | | |
| Manual height adjustment of the horizontal cutting bar | – | |
| Hydraulic height adjustment of the horizontal cutting bar | | – |
| Mounting plate and stay-rod | | |
| Delivery on a pallet stand | | |
| Working close to the ground (optional) | Fifth lower cutting module (fixed or pivoting) | – |
